FUME HOOD
Laboratory Fume Hood
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | BCAD-FH-422 |
Brand | Bio-cleanair |
Material | Mild Steel |
Air Volume (m3/h) | 1360 CMH |
Frequency (Hz) | 50Hz |
Voltage (V) | 415V |
Attribute | 1 Lakh |
Special type | 25000 extra |
Country of Origin | Made in India |
Additional Information:
- Item Code: 060
- Production Capacity: Customised
- Delivery Time: 3 weeks from the date of receipt of the PO & advance
- Packaging Details: Carton with wooden packing for safety transit
Laboratory Fume Hoods
Minimum Order Quantity: 1 Piece
Product Brochure
Attribute | 2 Lakhs |
Service | Laboratory Fume Hoods |
Service Location | All over the World |
Categories | Laboratory Hoods |
Country of Origin | Made in India |
“Bio-cleanair”™ CHEMICAL FUME HOOD:
“Bio-cleanair”™ Fume Cupboard is of three sides closed and front side provided with 5 mm thick clear glass up & down sliding door. The fume chamber will be provided with a centrifugal blower mounted on top of the Hood, coupled directly with a suitable motor for sucking the fumes from the hood and forcing it to go out to the atmosphere through the duct. The blower and casing will be made of mild steel with polyurethane paint coated / FRP finish.
Air Balancing |
Negative & 100% air exhaust to atmosphere |
Air Velocity at Suction Point |
Min. 100 FPM ±20 |
Inside Working Size Work top height from FL |
L 1500 x W 750 x H 900 mm Ht: 850 – 900 mm |
Overall Size |
L 1600 x W 850 x H 2400 mm |
Model No |
BCAD-FH-533 |
Design Structure |
Floor mounted type |
Construction Material |
Top & bottom cabinet made from 1.2 mm thick Galvanized Iron Sheet with pure epoxy powder coated finish . |
Interior Work Area |
Interior will be lined with 4mm thick Bisphenol “A” Fumirate FRP resin on the inside of the working area walls to protect the acid corrosion |
Baffle arrangement |
A stable, non-adjustable baffle with 3- Point suction on the back baffle to aid in distributing the flow of air into and through the hood. The baffle will be spaced out from the back liner. |
Worktop |
18 mm thickness chemical resistant black granite worktop with glossy finished |
Sink, Water tap with drain arrangement |
Worktop will have suitable SS sink with single way water tap will be provided at right side corner of the work top |
Front Sash / Shutter |
Vertical rising counter-balanced ‘Glass’ or Polycarbonate any other suitable material (5 mm thick or more) fitted in the PCGI frame. The bottom of the sash frame will have a full length of metal handle. The sash will be counterbalanced with weights to prevent titing and binding during operation and clear sash open height will be in the range 500-550 mm |
Additional Information:
- Item Code: 107
- Production Capacity: 10 Number / Month
- Delivery Time: 3 Weeks
- Packaging Details: Carton with wooden packing
Laboratory Fume Cupboard
Minimum Order Quantity: 1 Number
Product Brochure
Construction Material | Top & bottom cabinet made from 1.2 mm thick Galvanized Iron Sheet with pure epoxy powder coated |
Interior Work Area | Interior will be lined with 4mm thick Bisphenol "A" Fumirate FRP resin on the inside of the working |
Air Balancing | Negative & 100% air exhaust to atmosphere |
Air Velocity at Suction Point | Min. 100 FPM +-20 |
Design Structure | Floor mounted type |
Sink, Water tap with drain arrangement | Worktop will have suitable SS sink with single way water tap will be provided at right side corner o |
Attribute | 1 Lakh |
Worktop | 18 mm thickness chemical resistant black granite worktop with glossy finished |
Country of Origin | Made in India |
“Bio-cleanair”™ Laboratory Fume Hoods – By-Pass Airflow Type:
“Bio-cleanair”™ Fume Cupboard is of three sides closed and front side provided with 5 mm thick clear glass up & down sliding door. The fume chamber will be provided with a centrifugal blower mounted on top of the Hood, coupled directly with a suitable motor for sucking the fumes from the hood and forcing it to go out to the atmosphere through the duct. The blower and casing will be made of mild steel with polyurethane paint coated / FRP finish.
Air Balancing |
Negative & 100% air exhaust to atmosphere |
Air Velocity at Suction Point |
Min. 100 FPM ±20 |
Inside Working Size Work top height from FL |
L 1200 x W 600 x H 600 Ht: 850 – 900 mm |
Overall Size |
L 1300 x W 700 x H 2100 mm |
Model No |
BCAD-FH-422 |
Design Structure |
Floor mounted type |
Construction Material |
Top & bottom cabinet made from 1.2 mm thick Galvanized Iron Sheet with pure epoxy powder coated finish . |
Interior Work Area |
Interior will be lined with 4mm thick Bisphenol “A” Fumirate FRP resin on the inside of the working area walls to protect the acid corrosion |
Baffle arrangement |
A stable, non-adjustable baffle with 3- Point suction on the back baffle to aid in distributing the flow of air into and through the hood. The baffle will be spaced out from the back liner. |
Worktop |
18 mm thickness chemical resistant black granite worktop with glossy finished |
Sink, Water tap with drain arrangement |
Worktop will have suitable SS sink with single way water tap will be provided at right side corner of the work top |
Front Sash / Shutter |
Vertical rising counter-balanced ‘Glass’ or Polycarbonate any other suitable material (5 mm thick or more) fitted in the PCGI frame. The bottom of the sash frame will have a full length of metal handle. The sash will be counterbalanced with weights to prevent titing and binding during operation and clear sash open height will be in the range 650-700 mm |
Service fittings |
Remotely operated color coded (as per international norms) total two service Valves with flexible tubes & brass fittings (Valves for Nitrogen / Vacuum and Compressed Air). |
Additional Information:
- Item Code: 109
- Production Capacity: 20 Numbers / Month
- Delivery Time: 3 weeks
- Packaging Details: Carton with wooden case