Grossing Workstation
Dental Grossing Workstation
Minimum Order Quantity: 1 Unit
Application | Hospital, Laboratory |
Model | BCAD-GWS-500 |
Brand | Bio-cleanair |
Material | Stainless Steel |
Power Source | Electric Blower |
Voltage | 230 V |
Frequency | 60 Hz |
Driven Type | Electric |
Material Grade | SS316 |
Phase | Three Phase |
Features:
- Pull-out Writing Ledge at below the table
- Pull-out Pencil Drawer at below the table
- Paper Towel Holder at inside the workstation
- Shelf and Adjustable Bracket at inside the work area
- Exhaust Air Grill on the table and just below the storage platform
- Hand Water Spray Rinse on the table
- Magnetic Tool Bar at rear panel
- Grossing Perforated Tray on the Sink
- Floor leveling screws at bottom of the stand
Histopathologtm Grossing Workstation
Application | Hospital, Clinical |
Material Grade | SS304 |
Driven Type | Electric |
Voltage | 310 V |
Frequency | 60 Hz |
Suction Velocity | 100 - 150 FPM |
Phase | Three Phase |
“Bio-cleanair”™ vertical Laminar Flow Class II Type B2 Biohazard Safety Cabinets provide personnel, product, and environmental protection. This Series of cabinets are referred to as “total exhaust” cabinets because the 100% contaminated air is exhausted to the atmosphere after HEPA filtrations without re-circulating in the cabinet. To contain potentially hazardous aerosols, negative pressure zones surround all the positive pressure zones and Filter sealing.
Laminar airflow enclosures with High Efficiency Particulate Air (HEPA) filtration of exhaust air and an air barrier at the work opening. HEPA-filtered vertical laminar airflow, which is discharged to the work zone, creates an ultra-clean work environment for product protection. An air barrier between the operator and the work zone is maintained by a flow of room air into a full width grille in the work opening. The barrier air mixes with the laminar flow air in a sump underneath the work surface, and is exhausted to the outside environment via a HEPA filter.
Histopathology Grossing Workstation
Application | Clinical, Hospital |
Material | Stainless Steel |
Voltage | 230 V, Single Phase, 50Hz |
Power Source | Electric Blower |
Frequency | 60 Hz |
Phase | Three Phase |
Model No: BCAD-GWS-400 | Workstation Inner Size: W 48” x W 24” x H 32” |
Model No: BCAD-GWS-500 | Workstation Inner Size: W 60” x W 24” x H 32” |
Model No: BCAD-GWS-600 | Workstation Inner Size: W 72” x W 24” x H 32” |
Model No: BCAD-GWS-800 | Workstation Inner Size: W 96” x W 24” x H 32” |
Elevating Working Height | 0.8 to 1 Meter from the floor level |
Special Features:
The special features will be provided for the Grossing Workstation to needs your applications;
- Deep sink and provision for hot / cold water faucet
- Power LED Lighting
- 2 Nos. of 5/15A additional power sockets
- Pull-out Writing Ledge at below the table
- Pull-out Pencil Drawer at below the table
- “C” fold Paper Towel Holder at inside the workstation
- Inbuilt Exhaust Ventilation Air Grill with dual wall construction on the table and just below the storage platform to remove formalin fumes over work surface and from operator breathing zone
- Storage Plat form is 8” width at inside the work area
- Cleanable Pre Filter to remove fine particles
- Hand Rinsing Assembly
- Magnetic Tool Bar at rear panel
- Grossing Perforated Tray on the Sink
- High capacity waste disposal unit 0.50 – 0.60 HP (Sink erator)
- Height adjustable floor leveling screws at bottom of the stand
- Provision for magnifying lamp fixture
- Easy access frontload activated carbon filter to remove formalin vapor
- Provision for Digital Camera Holder
- Measuring scale either etched or fixed on the work surface
- Polypropylene / Polyethylene dissecting board for dissecting and for photography
- Safety splash shield
Grossing Workbench
Minimum Order Quantity: 1 Unit
Application | Laboratory, Hospital |
Material | Stainless Steel |
Material Grade | SS304 |
Driven Type | Electric |
Voltage | 310 V |
Frequency | 60 Hz |
Air Balancing | Negative |
Suction Velocity | 100 - 150 FPM |
Phase | Three Phase |
Our company holds specialization in manufacturing, supplying, retailing and exporting premium quality Grossing Workbench. These workbenches are manufactured under strict supervision of experts using supreme quality raw materials. Before the final dispatch, our offered products are stringently checked by our team of quality controllers. These workbenches are highly demanded by the clients.
Features:
- Pull-out Writing Ledge at below the table
- Pull-out Pencil Drawer at below the table
- Paper Towel Holder at inside the workstation
- Shelf and Adjustable Bracket at inside the work area
- Exhaust Air Grill on the table and just below the storage platform
- Hand Water Spray Rinse on the table
- Magnetic Tool Bar at rear panel
- Grossing Perforated Tray on the Sink
- Floor leveling screws at bottom of the stand