Grossing Workstations
Bio-cleanair”™ Grossing workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapours and odors from the work area, so you can be assured you're working in a safe environment. The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
- Model No: BCAD-GWS-400 Workstation Inner Size: W 48” x W 24” x H 32”
- Model No: BCAD-GWS-500 Workstation Inner Size: W 60” x W 24” x H 32”
- Model No: BCAD-GWS-600 Workstation Inner Size: W 72” x W 24” x H 32”
- Model No: BCAD-GWS-800 Workstation Inner Size: W 96” x W 24” x H 32”
Histopathology Grossing Workstation
Product Brochure
Driven Type | Electric |
Voltage | 220 V |
Frequency | 60 Hz |
Suction Velocity | 100 - 150 FPM |
Application | Hospital, Laboratory |
Material Grade | SS304 |
Automation Grade | Automatic |
Phase | Three Phase |
Material | Stainless Steel |
Model No: BCAD-GWS-400 | Workstation Inner Size: W 48” x W 24” x H 32” |
Model No: BCAD-GWS-500 | Workstation Inner Size: W 60” x W 24” x H 32” |
Model No: BCAD-GWS-600 | Workstation Inner Size: W 72” x W 24” x H 32” |
Model No: BCAD-GWS-800 | Workstation Inner Size: W 96” x W 24” x H 32” |
Elevating Working Height | 0.8 to 1 Meter from the floor level |
Special Features:
The special features will be provided for the Grossing Workstation to needs your applications;
- Deep sink and provision for hot / cold water faucet
- Power LED Lighting
- 2 Nos. of 5/15A additional power sockets
- Pull-out Writing Ledge at below the table
- Pull-out Pencil Drawer at below the table
- “C” fold Paper Towel Holder at inside the workstation
- Inbuilt Exhaust Ventilation Air Grill with dual wall construction on the table and just below the storage platform to remove formalin fumes over work surface and from operator breathing zone
- Storage Plat form is 8” width at inside the work area
- Cleanable Pre Filter to remove fine particles
- Hand Rinsing Assembly
- Magnetic Tool Bar at rear panel
- Grossing Perforated Tray on the Sink
- High capacity waste disposal unit 0.50 – 0.60 HP (Sink erator)
- Height adjustable floor leveling screws at bottom of the stand
- Provision for magnifying lamp fixture
- Easy access frontload activated carbon filter to remove formalin vapor
- Provision for Digital Camera Holder
- Measuring scale either etched or fixed on the work surface
- Polypropylene / Polyethylene dissecting board for dissecting and for photography
- Safety splash shield
Forensic Medicine Grossing Station
Minimum Order Quantity: 1 Piece
Product Brochure
Application | Clinical, Hospital |
Product Type | Laboratory Equipment |
Usage/Application | Grossing for the Histopathology Laboratory Application |
Model Name/Number | BCAD-GWS-600 |
Power Source | Electric Blower |
Voltage | 230V |
Material Grade | SS304 |
Frequency | 50 Hz |
Body Material | Stainless Steel |
“Bio-cleanair”™ Elevating Grossing workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapors and odors from the work area, so you can be assured you're working in a safe environment.
The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
Type Self Standing
Air Balancing Negative
Noise Level 65 dB “A” Scale
Suction Velocity 100 – 150 FPM
Power Supply 3 Phase, 415 V, 50 Hz
Accessories Name | Descriptions |
Type |
|
Model No. |
|
Constructions |
|
Basic dimensions for BCAD-GWS-300 Model
|
L 6’ 4” x D 2’.10” x H 7.9’ (In Feet) |
Histopathology Grossing Workstation - Semi Automatic
Minimum Order Quantity: 1 Unit
Product Brochure
Product Type | Laboratory Equipment |
Usage/Application | Histopathology Laboratory |
Model Name/Number | Bio-cleanair |
Noise Level | 65dBA |
Application | Histopathology Laboratory Purpose, Clinical, Hospital |
Model | BCAD-GWS-500 |
Brand | Bio-cleanair |
Material | Stainless Steel |
Phase | Three Phase |
Automation Grade | Semi Automatic |
Frequency | 60 Hz |
Suction Velocity | 100 - 150 FPM |
Air Balancing | Negative |
Voltage | 310 V |
Material Grade | SS304 |
Driven Type | Electric |
“Bio-cleanair”™ Elevating Grossing workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapors and odors from the work area, so you can be assured you're working in a safe environment.
The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
Type Self Standing
Air Balancing Negative
Noise Level 65 dB “A” Scale
Suction Velocity 100 – 150 FPM
Power Supply 3 Phase, 415 V, 50 Hz
Features:- Elbow Type faucet
- Cold & hot water faucet (Manual)
- “C” fold Paper Towel Dispenser and Towel Holder fixed on the work area
- Electronic weighing scale capacity 100gms with least count of 1.0 gm – 100gms
- Safety splash shield
- Inbuilt exhaust ventilation air grill with dual wall construction on the table and just below the storage platform to remove formalin fumes over work surface and from operator breathing zone
- Hand water spray rinsing assembly on the table
- Magnetic instrument holder at rear panel of the working area
- Top mounted illuminated Power LED Lighting (4/5/6 Nos. of Philips make) will be provided
- Polypropylene dissecting board 1 or 2 Numbers for the dissecting and for photography
- Formalin dispensing tank at the top of the table and to store the formalin and used it at the working area
- Commercial disposal high capacity, ½ HP automatic waste disposer (Sink Erator) fixed at underneath of sink to dispose of solid waste
- Work surfaces are recessed and sloped to facilitate in to the extra-large integral sink
- Easy access activated carbon filter to remove formalin vapor
- Waste disposable pin on side of the unit
- Glass view on both the sides of the working station
- 2 Nos. of 5/15A additional power sockets
- Pull-out Pencil Drawer at below the table
- Storage Plat form is 8” width at inside the work area
Additional Information:
- Item Code: 120
- Production Capacity: 15 Numbers / Month
- Delivery Time: 2-3 weeks
- Packaging Details: Carton with wooden boxes
Back Draft Grossing Workbench - Semi Automatic
Minimum Order Quantity: 1 Piece
Product Brochure
Product Type | Laboratory Equipment |
Usage/Application | Grossing for the Histopathology Laboratory Application |
Model Name/Number | BCAD-GWS-500 |
Noise Level | 65 dB in 'A' Scale |
Application | Hospital, Clinical |
Model | BCAD-GWS-500 |
Brand | Bio-cleanair |
Material | Stainless Steel |
Automation Grade | Semi Automatic |
Suction Velocity | 100 - 150 FPM |
Voltage | 415 V |
Material Grade | SS304 |
Air Balancing | Negative |
Phase | Three Phase |
Frequency | 50 Hz |
Driven Type | Electric |
“Bio-cleanair”™ & “CE” Certified ELEVATING GROSSING WORKSTATION:
“Bio-cleanair”™ Elevating Grossing workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapors and odors from the work area, so you can be assured you're working in a safe environment.
The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
Type: Self Standing
Air Balancing NegativeNoise Level: 65 dB “A” Scale
Suction Velocity: 100 – 150 FPM
Power Supply: 3 Phase, 415 V, 50 Hz
Accessories Name |
Descriptions |
Type |
|
Model No. |
|
Constructions |
|
Basic dimensions for BCAD-GWS-500 Model
|
|
- Elbow Type faucet
- Cold & hot water faucet (Manual)
- “C” fold Paper Towel Dispenser and Towel Holder fixed on the work area
- Electronic weighing scale capacity 100gms with least count of 1.0 gm – 100gms
- Safety splash shield
- Inbuilt exhaust ventilation air grill with dual wall construction on the table and just below the storage platform to remove formalin fumes over work surface and from operator breathing zone
- Hand water spray rinsing assembly on the table
- Magnetic instrument holder at rear panel of the working area
- Top mounted illuminated Power LED Lighting (4/5/6 Nos. of Philips make) will be provided
- Polypropylene dissecting board 1 or 2 Numbers for the dissecting and for photography
- Formalin dispensing tank at the top of the table and to store the formalin and used it at the working area
- Commercial disposal high capacity, ½ HP automatic waste disposer (Sink Erator) fixed at underneath of sink to dispose of solid waste
- Work surfaces are recessed and sloped to facilitate in to the extra-large integral sink
- Easy access activated carbon filter to remove formalin vapor
- Waste disposable pin on side of the unit
- Glass view on both the sides of the working station
- 2 Nos. of 5/15A additional power sockets
- Pull-out Pencil Drawer at below the table
- Storage Plat form is 8” width at inside the work area
Additional Information:
- Item Code: 118
- Production Capacity: 15 Numbers / Month
- Delivery Time: 2-3 weeks
- Packaging Details: Carton with wooden boxes
Stainless Steel Grossing Workstation
Minimum Order Quantity: 1 Unit
Product Brochure
Application | Hospital, Histopathology Laboratory Purpose, Clinical |
Model | BCAD-GWS-500 |
Brand | Bio-cleanair |
Material | Stainless Steel |
Phase | Three Phase |
Frequency | 60 Hz |
Suction Velocity | 100 - 150 FPM |
Driven Type | Electric |
Material Grade | SS304 |
Voltage | 310 V |
Air Balancing | Negative |
Stainless Steel Grossing Workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapors and odors from the work area, so you can be assured you're working in a safe environment. The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
Type Self Standing
Air Balancing Negative
Noise Level 65 dB “A” Scale
Suction Velocity 100 – 150 FPM
Power Supply 3 Phase, 415 V, 50 Hz
Accessories Name |
Descriptions |
Type |
|
Model No. |
|
Constructions |
|
Basic dimensions
|
|
Special Features |
|
Histopathology Grossing Workstation
Minimum Order Quantity: 1 Piece
Product Brochure
Product Type | Laboratory Equipment |
Usage/Application | Histopathology Laoratory |
Model Name/Number | CAD-GWS-500 |
Brand | Bio-cleanair |
Noise Level | 65 dBA |
Application | Hospital |
Material | Stainless Steel |
Material Grade | SS304 |
Driven Type | Electric |
Suction Velocity | 100 - 150 FPM |
Phase | Three Phase |
Automation Grade | Automatic |
Frequency | 60 Hz |
Voltage | 310 V |
Air Balancing | Negative |
“Bio-cleanair”™ Elevating Grossing workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapors and odors from the work area, so you can be assured you're working in a safe environment.
The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
Accessories Name | Descriptions |
Type |
|
Model No. |
|
Constructions |
|
Basic dimensions
|
L 4’ 4” x D 3.0’ x H 7.9’ (In Feet) |
Work top |
|
Basic design |
|
Air handling volume |
|
System / Static Pressure |
|
Special Features |
|
Additional Information:
- Item Code: 114
- Production Capacity: 15 Numbers / Month
- Delivery Time: 2-3 weeks
- Packaging Details: Carton with Wooden Boxes
Histopathology Grossing Workstation
Minimum Order Quantity: 1 Piece
Product Brochure
Height | 48 inches |
Product Type | Laboratory Equipment |
Usage/Application | Histopathology Laoratory |
Model Name/Number | CAD-GWS-800 |
Brand | Bio-cleanair |
Noise Level | 65 dBA |
Color | SS and Satin finish |
Material | Stainless Steel |
Sample Type | Formalin Vapor |
Operating Voltage | 415 Volt |
Test Method | Air Velocity Reading Method |
Test Volume | 100 FPM / Square Feet |
Power Supply Range | 415V, 3 Phase, 50 Hz |
Reagent System | Yes and Middle |
Automation Grade | Grade II |
Dimension | W 96" x D 30" x H 36" |
Driven Type | External Rotor |
Surface Finish | Satin finish |
Grade | IS 304 Grade SS |
Power Source | 415 V |
Surface Treatment | Matt finish |
Weight | 600 Kgs |
Packaging Type | Carton with Bubble packing |
Shape | Rectangular |
Voltage | 415V |
Phase | 3 Phase |
Material Grade | SS 304 |
Frequency | 50 Hz |
Suction Velocity | 100 - 150 FPM |
Country of Origin | Made in India |
Grossing Workstation Elevating Grossing workstation is totally eliminating IS 304 Grade Stainless Steel construction means a more Durable, longer-lasting finish. All workstations are factory-fitted with exhaust duct work that can be connected to any in-house ventilation system. Our unique Back-Draft ventilation system removes hazardous fumes, vapors and odors from the work area, so you can be assured you're working in a safe environment. The workstation is made of top-to-bottom stainless steel construction will withstand the harshest laboratory disinfectants.
Type Self Standing:
- Model No BCAD-GWS-800
- Air Balancing Negative
- Noise Level 65 dB “A” Scale
Essential Accessories;
- Made of IS 304 Grade stainless steel with no. 4 polish grossing workstation floor model with backward fume suction & rust free
- Back draft design to maximize capture velocity across the work surface
- Power LED Lighting
- 2 Nos. of 5/15A additional power sockets
- Pull-out Pencil Drawer at below the table
- Inbuilt exhaust ventilation air grill with dual wall construction on the table and just below the storage platform to remove formalin fumes over work surface and from operator breathing zone
- Storage Plat form is 8” width at inside the work area
- Sink integrally constructed with 1mm thick IS 304 Grade stainless steel mirror polish and drain pan
- Work surfaces are recessed and sloped to facilitate in to the extra large integral sink
- Hand water spray rinsing assembly on the table
- The Swivel Neck tap for washing platform as well
- Magnetic Tool Bar at rear panel
- High capacity, ½ HP Automatic Waste Disposer (Sink Erator) fixed at underneath of sink to dispose of solid waste
- Grossing Perforated Tray on the Sink
- Easy access frontload activated carbon filter to remove formalin vapor
- Polypropylene / Polyethylene dissecting board for dissecting and for photography
- Waste disposable pin on side of the unit
- Glass view on both the sides of the working station
- High performance exhaust blower to remove formalin vapor from the room
- Height adjustable floor leveling screws at bottom of the stand
Additional Information:
- Item Code: 124
- Production Capacity: 15 Numbers / Month
- Delivery Time: 2-3 weeks
- Packaging Details: Carton with wooden case